Brief catalog of innovation developments in RosNOU

Corporate Informational System Vector (CIS)

The working-out of RosNOU New Information Technologies Institute

The CIS Vector is designed for higher education institutions, including those having a network of subsidiary branches. Its big advantage is that it has been thoroughly tried in six state and non-state higher education institutions and in more than seventy of their subsidiary branches.

The CIS Vector includes software modules, each having logically independent functional constituent that makes it possible to adapt the System to the needs of a specific higher education institution. The System can be installed in a department or in a medium-sized higher education institution as well as in the corporate network of a large educational centre with numerous branches within quite big area.

Data exchange between subsidiary education centres with their leading institution does not depend on the Internet availability in the former ones or their on-line connection with the latter. The software modules are based on a single technological principle and have standard and fully transparent user interface. A number of functions (including electronic training, academic planning, remote access to the higher education centre resources and many more) are based on web technologies.

Documents circulation is managed through the University website, functioning on the basis of Microsoft Office SharePoint Server 2007.

On the hardware level the CIS Vector compatibility with Entrance/Passing Control Administration guarantees higher level of University security and ensures sophisticated students/employees entrance/passing.

In 15 University education centres there has been deployed and tested a video data system conjoined with the CIS Vector.

Prospective CIS Vector workings-out

Electronic University technologies can be the next step of a higher education institution informational development. Electronic University increases penetration into academic training process of efficiency-bound information technologies, with IT supporting and structuring of academic training, and not substituting the mainstream training process which goes beyond any kind of automatization anyhow.

Multi-purpose hardware-controlled complex for signal transformation and processing in telecommunications systems

The working-out of RosNOU Security Systems and Tecnologies Institute

Video and audio data hardware compression board has been developed on the basis of modern media processor TMS320DM642 (600Htz/720z), video decoder switch TVP5154 (Texas Instruments Inc.) and 16-bit sound endecs TLV320AIC20. The board supports most widespread algorithms in the field of safe-passage television H.263 and H.264.

Electronic Monitoring and Logging System (EMLS) with remote Internet access possibility that allows to develop professional CCTV systems on the basis of RosNOU AV 6-24 board and a PC.

Secure Video Conferencing System (SVCS) has been used to develop distance learning system, managing RosNOU subsidiary branches and setting-up of an internal University telephoning network.

Intellectual Safety Server (ISS) is an autonomous digital-to-analogue converter having following main modules of:

  • managing integrated safety systems, interacting with outer devices on the basis of the RISC-processor;
  • multimedia data processing on the basis of the DSP-processor and PLIS.

The biggest advantage of the ISS is that, being rather compact, it combines numerous systems:

  • traditional security systems of fire, biometric and other protection sensors as well as personnel and transport monitoring systems (the so-called electronic bracelet);
  • sophisticated CCTV and audio monitoring systems;
  • internal telephoning network and video conference systems;
  • communicator with various communication standards support systems (Gigabit Ethernet, Wi-Fi, GSM; radio communication in permitted frequencies, etc);
  • building infrastructure control server (smart building and smart home/domotics technologies).

Prospective workings-out

Telesecurity and telecontrol system

The radio channel network system of centralized protection, monitoring and control Integral-R is intended for controlling spatially located objects of protection (people, vehicles, animals) with digital data radio channel transfer of their location and state, and control signals transfer.

Acoustic suppressor

AS is based on the model of acoustic signal, which allows getting highly accurate predictions of its development in a short period of time. Thus essential decrease of total acoustic noises and interferences within a protected area (University premises, negotiations and recreation facilities, vehicles, etc) is achieved.

Voice signature (VS) technologies

It is a way of marking human information carrier with its subsequent verification by converting noise signal into graphic images. The re-transforming of the graphic images into audible speech does not affect recognizability of the recorded voice and the legibility of speech, and confirms key information of the protected document.

Scanning Sensor Microscope

The working-out of a partner company

  • Fully automatic adjustment before measuring (adjustment time up to 5 min).
  • Scanning rate up to 10 times higher than of any commercial SSM.
  • High scanning accuracy (nonlinearity: XY < 0,03%, Z < 0,1%).
  • Super-high resolution, up to the atomic level.
  • Possibility of measuring photosensitive samples without affecting them in any way due to the use of infra-red laser registering system.
  • Good solution for integrating the SSM with optical methods (Raman, Confocal).

Prospective workings-out

New generation of atomic force microscopes (AFM)

  • Fully motorized AFM for automatic laser-to-sensor adjustment.
  • Infra-red laser registration system with low level of noise for measuring light/photosensitive samples.
  • True Non-contact mode with specific safe sensor-to-sample admission.
  • High-speed 100μm scanner (resonance frequencies of the scanner are higher than 7KHz at XY and 15KHz at Z), linearity and precise positioning.
  • Enhanced feedback control with phase lag elimination at XY, scanner re-regulation and scanner clanging removal while high-speed scanning, without dynamic distortion of the image.
  • Digital module controller with possibilities of functional extension and high-speed DSP.
  • 3D scanning.

Scanning Sensor microscope for ultraviolet-visible spectroscopy

  • SSM integrated with confocal microspectrometer.

  • Direct and side access for carrying-out high resolution confocal and TERS experiments.
  • Getting optical images by sample or laser scanning.
  • Automatic replacement of stimulating laser; powerful software for SSM and optical data processing.


Wind Energy Facility Windboard (WEF)

The working out of RosNOU WindEnergy Laboratory

Technical characteristics:

  • facility wind speed from 3m/s and up without restriction (tried at up to 45m/s);
    0 using squall, blast or speed-pulsation energy;
    1 routine functioning without any tuning in all-direction winds
  • module principle of assembling;
  • easily available construction materials;
  • recycling of sudden squalls and blasts of wind as well as high-frequency wind speed pulsations;
  • rotor movement begins by itself;
  • routine functioning without any tuning, in all-direction winds;
  • steadiness increase of the facility with the rotor speed increase due to gyroscopic effect;
  • simplicity of assembly and technical maintenance;
  • high level of performance and reliability;
  • environment-friendly and lack of obtrusive noise (rustling of bearings only); safe for birds and animals;
  • minimal visual landscape invasion;
  • possibility of erecting rows of powerful wind-energy weirs;
  • possibility of autonomous or parallel functioning with other sources of direct and alternating current, solar batteries, rechargeable batteries or any other power supply system;
  • the original electric generator and automatic system of high energy conversion efficiency is coordinated with wind-mechanic rotor part and directly connected with the roller;
  • safety guaranteed by lack of outer revolving fans/blades;
  • high reliability of the facility;
  • lack of stator for the wind-power part of the board;
  • high rotor speed;
  • lightness (20 kilograms);
  • modularity both in building-up of rotors and boards (likewise in solar batteries);
  • power factor in using the wind is bigger by 30% due to the use of different spectra of the wind flow;
  • the 2 square metre windboard has 200W power.

Ultraclean multi-layer carbon nanotubes synthesis mrthod

The working-out of RosNOU Carbon Nanomaterials Laboratory

There has been developed a low-temperature catalytic method of obtaining new material carbon nanotubes (CNT).

The method is based on transforming of carbon-containing gases (methane, propane, butane, carbon dioxide and monoxide) into new compositional materials carbon nanotubes (CNT).

Nanotubes can have electroconductive, semiconductive and magnetic qualities.

CNT are used successfully to make compositional materials with different characteristics. A special feature of the technology is that it does not contain soot that excludes the refinement/cleaning strage (the material is more than 98% clean).

Prospective workings-out

Genetic engineering

A series of experiments has been carried out to study the possibilities of using carbon multi-layer nanotubes as microcarriers of genetic material into plants cells.

As a result a high level of transient genetic expression gfp has been discovered every time the given experiment was repeated. Also, possibilities of using carbon multi-layer nanotubes; there was more even luminescent spots distribution on the explants surface. Moreover the experiments have demonstrated the possibility of using carbon multi-layer nanotubes as microcarriers of genetic material into plants cells. This technology, compared with the traditional using of gold and tungsten particles, has a number of strong points and advantages.

Materials modified by CNT

There has been elaborated an experimental technology of making cement mortar and concrete modified by highly clean CNT to produce reinforced concrete in construction industry.

Laboratory testing of this technology proved that using carbon nanomaterials increases strength and durability of the product by no less than by 20% as well as their water-resistance; it decreases their relative shrinkage no less than by 30% all these without any significant increase in their prime cost.

Innovative Health Protection and Health Recovery Medical Technologies in Higher Education System

Efficient diagnostics and health recovery complex

The working-out of the Health Protection Technologies in Education Centre

License 77-01-000611 of May 12, 2005.

Major areas of diagnostics and treatment of illnesses and disorders:

  • general therapy;
  • vertebral column disorders;
  • central and peripheral nervous system disorders;
  • all kinds of vascular pathologies.

The patients can also have their stress removed and anxieties reduced; they will be treated for insomnia, helped strengthen their defence mechanisms, improve mental and physical efficiency.

The Complex quickly determines the anatomy of the patient, diagnoses vertebral column pathologies and spinal nerves conduction disorders.

Relaxation Massage Complex:

  • diagnoses dynamic conditions of the vertebral column;
  • carries out manual therapy;
  • offers all kinds of medical massage (general, linear, segmental, vacuum, etc);
  • restores intervertebral discs using auto-gravitation couch.

Complex magnetotherapy complex is based on therapeutic and health-improving effect of low intensity magnetic field of special structure.


  • blood circulation improvement;
  • metabolism normalization;
  • hypotensive effect;
  • anti-inflammatory and pain-killing effect;
  • strengthening defensive mechanisms;
  • detoxication;
  • restoring stamina and endurance.

Diagnostics and internal diseases treatment. Using unique diagnostics methods (electronic organometry), experienced physicians and specialist doctors will pinpoint the disease and select the necessary medicine and registered homeopathic drugs for the specific patient.

The totally unique treatment is effective and painless.

The Centre is headed by academician of the Russian Academy of Medical Science Stupakov Gury Petrovich, Honoured Science Worker, State prize winner and the D. Steppa international prize winner.

The Centre has made a discovery on reasons for many chronic diseases (cardiovascular, central nervous system diseases, etc) and worked out their treatment methods.

Cardiocode is a computer based analyzer of hemodynamics. Portable, can work in real-time operation mode and send data to any distant computer.

Cardiocode is many times more informative than any modern method of cardiodiagnostics; it registers parameters of each of the ten phases of the heart functioning, which allows doctors to predict pathological developments at early stages of a disease.

Cardiocode designed in accordance with the discovery by V.B. Alexeyev, V.A. Zernov, S.A. Matsuk, M.Yu.Rudenko (No 290, July 5, 2005) gives new perspective on the blood-flow in major blood vessels.

Technologies Complex: medical treatment and health improvement on the cell level endoecological rehabilitation and treatment (ERT)

The working-out of the RosNOU Endoecological medicine

The endoecological trend in remedial and health-improvement medicine has been elaborated by Prof. Yu.M. Levitin, the Russian Government and the Lifelong Profession prize winner. This new medical branch is all about cells environment in the human body and is directed at driving toxins out of it.

The endoecological rehabilitation is good both for sick people, who need to get rid of toxins and ensure effectiveness of the treatment, and for practically sound as their personal preventive measures and health improvement programme.

The Centre uses a complex of devices for endoecological rehabilitation. The means and methods of endoecological rehabilitation are all approved of by the Russian Academy of medical Sciences, the Ministry of Health.

Rambler's Top100